Installation Instructions
Download a copy of the Digital and Prewound 50mm pipe Installation Instructions
Calclear Digital and Prewound 50mm pipe Installation Instructions
or follow these instructions:
Protect CALCLEAR computer unit from weather, moisture, direct sunlight and extreme temperatures. This PREWOUND 50mm pipe is to be inserted into the feed waterline. The antennae windings are already configured on the outside of the pipe and ready for attachment to the CALCLEAR. The installer will need to install their own connectors to join the ends of the pipe to their supply pipe. Fit the CALCLEAR 1 metre away from pump motors or other strong electromagnetic fields which may distort the signals of the CALCLEAR unit. Antennae cable is constructed from high temperature silicone and can withstand heat up to 85deg C. The 4 ends of the antennae cables are to be connected to the 4 plugs on the CALCLEAR control unit. It is important that they are connected in the order shown on the diagram. One antennae attaches into #1 & 2 plugs next to each other and the second antennae to 3 & 4.
Example: Unscrew plug #1, insert the metal end of the antenna half way into the exposed hole – do not push in the plastic end. Screw plug cover back onto the metal end of the antenna and tighten. Repeat with other antennae end onto #2 plug. Repeat with 2nd antennae to plugs 3 and 4. Fit computer unit onto the wall as close to the pipe to be treated as possible. 4 corner brackets may be screwed by one arm into back of box allowing 2 arms of each corner bracket to be attached to wall. Double sided tape on back of container is optional to attach to wall.
Transformer: The plug-in transformer can now be connected to complete the installation. MAKE SURE TRANSFORMER IS FITTED NEATLY INTO SOCKET AND THEN SCREW SLEEVE WOUND AND TIGHTENED. LED lights indicate sequenced programme operating. If lights do not go on brightly and start a sequence, phone technical number. Inbuilt surge protector is being used, however surge protector is needed for Power Pack Transformer. Warranty does not cover lightning strikes.
For more information contact our technical department: info@calclear.com.au or phone +612 9977 8801
Print page